If you're having trouble with the drain on your Kitchen Sink, this tutorial will show you how to remove it and replace it. To start, remove the strainer. You can do this by unscrewing the nut that holds the strainer in place. Then, insert the new strainer into the drain pipe. To check if the drain is free of water, run a wet paper towel down the drain pipe.
Remove the strainer
Before removing the strainer, make sure that you're working with the right type of strainer. Some strainers have a "basket" that can catch large items, which means that they can cause a leak. Before you replace the basket strainer, gather your tools and prepare the area. To prepare for the job, lay out an old cloth or towel, as well as a small box or tray. Next, remove the coupling nut. The coupling nut is usually made of metal, while the screws are usually PVC.
Remove the old strainer
The next step in changing the kitchen sink drain is to remove the old strainer. If you notice any leaks, the culprit is most likely the strainer. It's the black section on the bottom of the sink. Once you've removed it, you'll need to install a new one. To do this, you'll need a set of pliers and a plumber's putty.
If you're replacing a single sink, be sure to unplug the pipes first before removing the old one. If you're dealing with a single sink, you won't need an extra tee. If you have more than one sink, you'll need to purchase a new set of slip nuts. To prevent leaks, make sure that you use adjustable pliers to remove the tailpieces. Once you've removed the old one, drop the new one into the drain pipe.
Need a set of pliers
To replace the sink, you'll need to unplug the drain pipe and measure the length of the water lines to determine how much space you'll need to replace it. Before you begin the process of changing the drain, you'll need a set of pliers and a plumber's putty. If your kitchen sink has a silicone gasket, it will be easy to install the new one.
Unplug the water supply
To change the sink's drain pipe, you'll need to unplug the water supply. Turn off the hot and cold water valves separately. Then, turn the water off. It should drip a few drops or even flow at a very slow pace. During this time, it's important to keep the water piping in place to avoid any leaks. The sink's tailpiece must extend past the level of the drain pipe.